The Aqua Plus self-priming pool pump is a real all-rounder for all kinds of private pools and ponds, due to the flexible connection options and the large strainer tank.
The Aqua Plus has a powder-coated motor and is corrosion resistant against swimming pool water and chemical additives. All housing parts are made from reinforced plastic, resistant to chlorine, and promise a long service life. Installed in the open, the pump should have simple protection against the effects of the weather.
Screws on the suction and pressure sides
Bellow-type mechanical seal on a plastic protector sleeve
Self-priming pump (assembly max. 2 m above or max. 3 m below the water level)
Large strainer tank with approx. 0.5 l capacity
Strainer basket mesh size approx. 2.8 x 2.8 mm
Suitable for 350 – 500 cm filter container
The Aqua Plus is based (as all Aqua TechniX pumps) on the principle of electrical separation. Thus the pump/motor shaft has no contact with the pool water.
Pool volume m3; 30
Flow rate m3/h; 6
Discharge head mWS; 8
Inlet/Outlet RP; 50/50
Recommended inlet/outlet pipe diameter; 50/40
Motor speed rpm; 2840
Power input P1 kW; 0.45
Power output P2 kW; 0.25
Motor voltage V; 230
Frequency Hz; 50
Rated current A; 2.30
Integrated overload switch; Yes
Type of motor enclosure; IPX4
Sound level dB(A); 59.2